SIMOTICS Motor Generation 1LE1 General Purpose
Motors with aluminum frame
SIEMENS 1LE1 motors with aluminum frame are suitable for a wide range of standard drive tasks in the industrial environment. As a result of their especially low weight, they are predestined for pump, fan and compressor applications. However, they are also admirably suited for conveyor technology and lifting equipment.
Technical data overview
|Power and voltage range:||0.55 kW to 22 kW
For all of the usual voltages
|Frame sizes and types of construction:||80 to 160 in all of the usual types of construction|
|Rated speed:||750 - 3600 min-1|
|No. of poles:||2 / 4 / 6 / 8|
|Efficiency classes:||IE1 = Standard Efficiency
IE2 = High Efficiency
IE3 = Premium Efficiency
NEE = NEMA Energy Efficient Motors
NPE = NEMA Table 12-12 Premium Efficient Motors
- Especially user-friendly
The well-proven terminal boxes introduced for shaft heights 100 up to 160 are now also consequentially used in the complete motor series. The 2 and 4-pole motors, frame sizes 80 and 90 go even one step further: For these motors, the terminal box is only fixed using one screw, and it can be set to any angle between 0 and 360 degrees. In addition, the terminal box has a preconfigured terminal board. This makes it significantly simpler and faster to install motors in restricted spaces, as the motor connecting cable can be routed to the motor from any direction.
- Special export line
The Eagle Line is available for export into NAFTA. The motors are supplied with the electrical values in compliance with EISA stamped on the rating plate.
- More power
Increased output power motors can be the solution if the motor must be extremely compact as there is not sufficient space available for a standard motor. With these motors, in efficiency class IE2, power ratings of a standard motor can be realized in the next smaller shaft height.
- Conveyor technology
- Lifting equipment
- Production industry