

HIMMEL Worm gear motors and worm gear units
Gear motors and gear units in foot, flange and shaft mounted design with torque arm and shrink disk.
HIMMEL® worm gear motor range is differentiated by worm gear units with overhung worm shaft, worm gear units with worm shaft bearings on both sides, worm gear units with a spur gear stage and spur gear follow-on stage. The cast iron gearbox housing is stable, vibration-damping, and designed for continuous operation. Alternatively, the housing can also be manufactured in aluminium. Oil leakage or ingress of dust is prevented by radial shaft seals equipped with a dust lip. The spur gear gears are machined and surface hardened. The tooth flanks are ground. Helical gear teeth achieve supreme running smoothness. Worm gear units are used for drive applications where high overall ratios and high efficiencies are required from worm gear units (up to 94%).
Technical data
Feature | Unit | Value |
Power | kW | 0,09 to 22 |
Driving torque | Nm | 25 to 4400 |
Rotation speed | min1/rpm | 0,1 to 329 |
Ratio | 4,28 to 14 |
Gear unit designation | No. of stages | Ratio range | Max. rated gear unit torque |
SC36 | 1 stage | 7 - 60 | 43 Nm |
SC50 | 1 stage | 7 - 100 | 80 Nm |
SC63 | 1 stage | 7 - 100 | 166 Nm |